Knurling Data.


Fractional Blank Diameters Using Standard Diametral Knurling Tools.
Diametral Pitch 160128 9664
Approx Depth
of tooth or
Increase
in Knurled Dia.
0.0090.012 0.0160.024
Diameter of
Blank
Knurl
Dia.
No. of
Teeth in
Knurled
Circum.
Knurled
Dia.
No. of
Teeth in
Knurled
Circum.
Knurled
Dia.
No. of
Teeth in
knurled
Circum.
Knurled
Dia.
No. of
Teeth in
Knurled
Circum.
3/32 0.094 0.103 15 ---- ---- ---- ---- ---- ----
1/8 0.125 0.134 20 ---- ---- ---- ---- ---- ----
9/64 0.141 ---- ---- 0.153 18 ---- ---- ---- ----
5/32 0.156 0.165 25 0.168 20 ---- ---- ---- ----
11/64 0.172 ---- ---- 0.184 22 ---- ---- ---- ----
3/16 0.188 0.197 30 0.200 24 ---- ---- ---- ----
13/64 0.203 ---- ---- 0.215 26 ---- ---- ---- ----
7/32 0.219 .228 35 0.231 28 ---- ---- ---- ----
15/64 0.234 ---- ---- 0.246 30 ---- ---- ---- ----
1/4 0.250 0.259 40 0.262 32 0.266 24 ---- ----
17/64 0.266 ---- ---- 0.278 34 ---- ---- ---- ----
9/32 0.281 0.290 45 0.293 36 0.297 27 ---- ----
19/64 0.297 ---- ---- 0.309 38 ---- ---- ---- ----
5/16 0.312 0.321 50 0.324 40 0.328 30 ---- ----
21/64 0.328 ---- ---- 0.340 42 ---- ---- ---- ----
11/32 0.344 0.353 55 0.356 44 0.360 33 ---- ----
23/64 0.359 ---- ---- 0.371 46 ---- ---- ---- ----
3/8 0.375 0.384 60 0.387 48 0.391 36 0.399 24
25/64 0.391 ---- ---- 0.403 50 ---- ---- 0.414 25
13/32 0.406 0.415 65 0.418 52 0.422 39 0.430 26
27/64 0.422 ---- ---- 0.434 54 ---- ---- 0.446 27
7/16 0.438 0.447 70 0.450 56 0.454 42 0.462 28
29/64 0.453 ---- ---- 0.465 58 ---- ---- 0.447 29
15/32 0.469 0.478 75 0.481 60 0.485 45 0.493 30
31/64 0.484 ---- ---- 0.496 62 0.---- ---- 0.508 31
1/2 0.500 0.509 80 0.512 64 0.516 48 0.524 32
33/64 0.516 ---- ---- 0.528 66 ---- ---- 0.540 33
17/32 0.531 0.540 85 0.543 68 0.547 51 0.555 34
35/64 0.547 ---- ---- 0.559 70 ---- ---- 0.571 35
9/16 0.562 0.571 90 0.574 72 0.578 54 0.586 36
37/64 0.578 ---- ---- 0.590 74 ---- ---- 0.602 37
19/32 0.594 0.603 95 0.606 76 0.610 57 0.618 38
39/64 0.609 ---- ---- 0.621 78 ---- ---- 0.633 39
5/8 0.625 0.634 100 0.637 80 0.641 60 0.649 40
41/64 0.641 ---- ---- 0.653 82 ---- ---- 0.665 41
21/32 0.656 0.665 105 0.668 84 0.672 63 0.680 42
43/64 0.672 ---- ---- 0.684 86 ---- ---- 0.696 43
11/16 0.688 0.697 110 0.700 88 0.704 66 0.712 44
45/64 0.703 ---- ---- 0.715 90 ---- ---- 0.727 45
23/32 0.719 0.728 115 0.731 92 0.735 69 0.743 46
47/64 0.734 ---- ---- 0.746 94 ---- ---- 0.758 47
3/4 0.750 0.759 120 0.762 96 0.766 72 0.774 48
49/64 0.766 ---- ---- 0.778 98 ---- ---- 0.790 49
25/32 0.781 0.790 125 0.793 100 0.797 75 0.805 50
51/64 0.797 ---- ---- 0.809 102 ---- ---- 0.821 51
13/16 0.812 0.821 130 0.824 104 0.828 78 0.836 52
53/64 0.828 ---- ---- 0.840 106 ---- ---- 0.852 53
27/32 0.844 0.833 135 0.856 108 0.860 81 0.868 54
55/64 0.859 ---- ---- 0.871 110 ---- ---- 0.883 55
7/8 0.875 0.884 140 0.887 112 0.891 84 0.899 56
57/64 0.891 ---- ---- 0.903 114 ---- ---- 0.915 57
29/32 0.906 0.915 145 0.918 116 0.922 87 0.930 58
59/64 0.922 ---- ---- 0.934 118 ---- ---- 0.946 59
15/16 0.938 0.947 150 0.950 120 0.954 90 0.962 60
61/64 0.953 ---- ---- 0.965 122 ---- ---- 0.977 61
31/32 0.969 0.978 155 0.981 124 0.985 93 0.993 62
63/64 0.984 ---- ---- 0.996 126 ---- ---- 1.008 63
1/0 1.000 1.009 160 1.012 128 1.016 96 1.024 64