Printed Wiring Board Information

For commonly used capacitors.
  			    				
				 ---                    
				|___|
				 | |                     
	 	   |  spec | max|    |pad size |
  comp type  |style| mil-c-|lead|hole|pth |npth|lng |hgt |wid |spac-|
      fxd    |     |       |    |    |    |    |    |    |    | ing |
______________________________________________________________________   
cap,mica,v.v.|cmr04|39001/5|.018|.033|.078|.094|.390|.380|.220|.150 |
cap,mica,500v|cmr05|39001/5|.027|.041|.093|.109|.480|.473|.220|.225 |
cap,mica,500v|cmr06|39001/5|.034|.047|.093|.109|.700|.580|.381|.350 |
cap,mica,500v|cmr07|39001/5|.042|.060|.100|.125|.830|.920|.450|.425 |
cap,mica,v.v.|cmr08|39001/5|.042|.060|.100|.125|1.50|.940|.500|1.05 |
cap,cerm,200v|ckr05|39014/1|.029|.043|.093|.109|.200|.200|.100|.200 |
cap,cerm,v.v |ckr06|39014/2|.029|.043|.093|.109|.300|.300|.100|.200 |
cap,cerm,50v |ckr07|39014/3|.029|.043|.093|.109|.300|.300|.200|.200 |

			       ______
	 	          ----|______|----

	       |  spec | max|    |pad size |
comp ty| style | mil-c-|lead|hole|pth |npth|lng |dia |x 1)| spacing |
______________________________________________________________________
6-125v |       |       |    |    |    |    |    |    |    | std| min|    
       |a case |39003/1|.022|.036|.078|.100|.422|.151|.048|.650|.575|
cap,fxd|b case |39003/1|.022|.036|.078|.100|.610|.201|.048|.825|.750|
csr13  |c case |39003/1|.027|.041|.093|.109|.822|.305|.051|1.05|1.00|
       |d case |39003/1|.027|.041|.093|.109|.922|.367| 2) |1.10|1.10|
-------|-------|-------|----|----|----|----|----|----|----|----|----|
cap,fxd|  t1   |3965/24|.027|.041|.093|.109|.828|.219|.051|1.05|1.00|
cL66,  |  t2   |3965/24|.027|.041|.093|.109|1.02|.312| 2) |1.20|1.20|
cL67   |  t3   |3965/24|.027|.041|.093|.109|1.14|.406| 2) |1.33|1.33|
-------|-------|-------|----|----|----|----|----|----|----|----|----|
cap,fxd|et1,gt1|39006/9|.027|.041|.093|.109|.828|.219|.051|1.05|1.00|
cLr65  |et2,gt2|39006/9|.027|.041|.093|.109|1.02|.312| 2) |1.20|1.20|
       |et3,gt3|39006/9|.027|.041|.093|.109|1.14|.406| 2) |1.33|1.33|
-------|-------|-------|----|----|----|----|----|----|----|----|----|

	  1) radius required to clear auto insertion tool.
	     e.p. spacing + (2 x X) = tool clearance
          2) not auto insertable.